Creating an Arched Screen

0:00Bryan So in my opinion, it's at 1220, and I need 35, 40 minutes to get there. So do—

0:06Brett This won't take long.

0:07Bryan Okay.

0:08Brett Especially because I'm guessing you're going to have to come back and do something, because this is not how we do things.

0:16Bryan Thank you, sir. Much appreciated.

0:17Brett We don't make...

0:21Bryan It's fine. All I have to tell you is I expect you to laugh. I'm okay if you laugh. You're not going to hurt my feelings. This is so ghetto rigged right here. You're going to look at this, say, "Brian, what the f**k?" I'm sorry, are we on camera?

0:32Brett Yeah.

0:33Bryan Oh, okay. Sorry. I'll watch my language. So I'm expecting you to just laugh.

0:38Brett We'll get it. We'll—

0:39Bryan All right. Now we'll just take the... Basically, I just want to get a measurement.

1:14Brett Uh-huh.

1:14Bryan And how high it goes.

1:18Brett Okay.

1:18Bryan That's basically—

1:19Brett Okay.

1:20Bryan So next time, you probably don't even need to make these things and—

1:23Brett Okay

1:23Bryan … but this is a different situation. All I'm going to do is-- okay. Yeah. So all I'm going to do is tell you just the backstory just so you understand before I show you this, because you're going to laugh. All right. I got the lead, and I showed Derek at another install, and he goes, "Here's all you want to do. Get there, ask them for a piece of paper, and trace it." And I said, "Okay, I'll do that." So I got there, and I told the guy, "So on." He's like, "Yeah, this is a great solution you came up with, Brian." I went, "Great," because it was like Derek's. And I said, "Now what I need from you is a piece of cardboard, I need to trace this," and all I had was a yellow highlander. So here it goes.

1:56Brett Okay.

1:57Bryan Okay? This is f*****g embarrassing, dude. Anyway, okay. Do not pay attention to that one. This is all you're doing from here to here. If you connect to this point to this point—

2:11Brett Is that—

2:12Bryan … it's 41 inches And it's that, where that goes up with the picture you showed me, it goes up. Derek says he's going to put the housing right there.

2:20Brett Yes.

2:21Bryan And so I just—

2:24Brett Here's— This is good. I just don't know how this is going to... I've only done maybe one of these for him, and I do them for him—

2:33Bryan Yeah

2:33Brett … and he does them, so.

2:34Bryan So here's what I'm thinking, okay? Because look at it this way, okay? So this is the inner trace. So technically, you and I, according to your dad, are going to use, I believe one-inch frame and bend, one-inch frame. It's got to be brown because my retractable is brown, or bronze. Bronze is fine.

2:56Brett Bronze is fine, yeah.

2:57Bryan Okay? All right. So remember, as long as we hit this measurement, and even if it's not perfect, remember, he's going to be, he being Derek, is going to install these things with, I believe, clips or screws, one of the two. I don't know how he's going to do it. I'm going to leave that up to him. But as long as you are bigger than this, we can hide the rest.

3:18Brett It has to go in that thing, though.

3:20Bryan Does it have to go in it, or does it have to go on the outside?

3:23Brett I think we're going... See?

3:24Bryan Okay, so hold on.

3:25Brett That's stuff that—

3:26Bryan Okay

3:27Brett … we need to know.

3:28Bryan Here's the deal, man. So look, check this out, because this might help you out, Brett. No, not Brett. Sorry, not Brett.

3:33Brett That's what I think. No, I'm Brett.

3:35Bryan No, I want to show you—

3:36Brett Oh

3:36Bryan … I want to show you Derek. Hold on real quick. Derek. Here we go. So this is what you did for Derek.

3:46Brett Hmm. This is one we did?

3:48Bryan Yes, sir.

3:48Brett Yeah. Okay.

3:49Bryan He did doubles. Now that's his piece on the... So he does something.

4:00Brett Dude, I did not do that.

4:03Bryan No, you didn't.

4:04Brett He stole that from me.

4:06Bryan Oh, s**t. Look at that. That's not even connected.

4:10Brett This is a piece that I wasn't even... That's cut straight. I did not do that.

4:14Bryan Oh, s**t.

4:15Brett See?

4:16Bryan Okay. That's what—

4:16Brett So here's what I want to do then.

4:17Bryan Okay.

4:18Brett Okay. Here's what we're going to do. You and I... Okay.

4:21Bryan Look, dude. Yeah. If you want to get a black marker and trace that, I'm okay.

4:25Brett Oh, I can do that, too.

4:25Bryan Yeah, whatever you want to do. Just know that from this point to this point, you're looking at... Hold on. Let me be spot on for you.

4:34Brett I kind of want to make this. Let's make a straight line in the bottom, maybe.

4:37Bryan Yeah, I'm cool with that. Like—

4:40Brett Hold on here.

4:40Bryan No, you're fine.

4:42Brett Let's see here.

4:47Bryan Excuse me.

4:50Brett You can go 41, dude. 41 inches. That's the bottom?

4:55Bryan Yes, sir. That's your straight line.

5:07Brett So I don't even know if we should... I don't know, man.

5:16Bryan What was I going to say? Oh, s**t. No. I had one of those. I was supposed to bring that today. Damn it.

5:21Brett Oh, no. You're fine. You can... Whenever you see people.

5:25Bryan Well, so I cut it. Your dad came and saw my shop—

5:28Brett Mm-hmm

5:28Bryan … last week. And so he had me cut it down for him, then he left it in my shop, AKA garage. And then I was supposed to bring it to you today and I forgot. So I owe you guys one big one.

5:41Brett Okay.

5:41Bryan So I got a big one coming your way. And this is the end right there.

5:44Brett Yes.

5:46Bryan Of course. Dude, you guys are busy, man.

5:51Brett Yeah, busy.

5:52Bryan You guys are crazy busy, huh?

5:54Brett I could've said July wasn't very... It should've been a little more. But I totally... Yeah.

6:00Bryan You guys are strewn around. I thought I was being—

6:03Brett Yeah, those two are Aaron's jobs. I got to finish one over there. That's a Western Hills that I got to do, and this is part of that. This is a big one.

6:12Bryan Oh, Steve. Like— Because you're killing it, dude.

6:15Brett Are you sure?

6:15Bryan I take it you're working today.

6:17Brett Oh, yeah. Yeah. I have ember mesh jobs I got to cut.

6:21Bryan Oh, s**t. Let's go, dude. This is all right.

6:24Brett This is fine. I get paid for this.

6:28Bryan Cool.

6:29Brett So anyway.

6:29Bryan All right.

6:30Brett So let's cut this mother into this. Okay, so just to be straight, okay, so remember, this is the inside dimension, so if you're saying that's got to go on the inside, by all means.

6:45Bryan I do. That's what I'm thinking. That's how I'm going to make it.

6:48Brett Okay. Whatever this is, we're going to make it that high.

6:51Bryan Okay.

6:52Brett And then if it needs to be—

6:53Bryan Adjusted

6:54Brett … changed, we'll change it.

6:55Bryan Okay.

6:55Brett That's why I say these aren't...

6:58Bryan This isn't perfect science is what you're saying.

7:00Brett And it is a lot of math because 40, I'm probably going to have to bend this because this does not... I think, dude— Even half, like if it was 40—

7:13Bryan Yeah

7:13Brett … and that was 20—

7:14Bryan Yeah

7:14Brett … that's probably good. Or if it's like 46—

7:17Bryan Yeah

7:17Brett … by 23.

7:18Bryan Yeah. But you just said this is about...

7:22Brett Well, I think it's a 41.

7:24Bryan 41. That's not the same, man.

7:27Brett Okay, which means so here's the deal. Look, this is 37.

7:30Bryan Okay, hold on.

7:32Brett Oh. Right here. Still 30.

7:40Bryan How about we... Or did you—

7:42Brett Hold on, hold on, hold on, hold on. Bring it back over here. Well, if we go there, that's 38 and a half.

7:48Bryan Yeah, but you see that this has got to go over here so this part goes over here.

7:52Brett Okay, here's what I want you to do. Let's go to 40.

7:55Bryan Go to 40. By 10.

8:02Brett Okay. So we'll make it 40 by 10.

8:04Bryan 40 by 10.

8:04Brett And we'll try to do that. Maybe even

8:10Bryan before he goes over there, you could just... Because I think it should fit in that. I don't think we want to go over. If you go—

8:17Brett I don't know

8:18Bryan … if you make it 40 by 10, it should fit inside. I'd be worried about there being too much room. I think, hold on here, would you cut this right here? Let's just have a look at something because again, all I have is a freaking highlighter, dude.

8:34Brett I mean— You have to be like, that's not going to count. That's a 16th right there.

8:39Bryan Yeah, man.

8:44Brett Yeah, I feel like doing this is kind of... Sometimes my dad does do this if they're weird measurements, but basically, you just measure the bottom—

8:56Bryan Mm-hmm

8:56Brett … and then you measure wherever the center is.

8:59Bryan He's going to do that. Yeah. See, he doesn't—

9:02Brett Well, I also haven't been trained in this method.

9:04Bryan I know. Yeah. What I should have done is I should have brought your dad. And he's not really trained in doing the half circles.

9:11Brett Right, Derek doesn't—

9:12Bryan Yeah. Well, I was all pumped. He's like, "Just go trace." I was like, "Oh, that's easy. I can do that." And then I traced it. Hold on here. Let me show you.

9:19Brett No, it does work sometimes. I know this. Okay, so hold on. Here's your color right here. That's your color.

9:25Bryan So I mean, bronze should go really well with that, which I'm happy about that.

9:29Brett Yeah. No, you know the colors Active has, so. Yeah. So and that's it right there.

9:34Bryan That looks like we'll be able to do this.

9:37Brett We'll be able to do it. It's not going to be... That's the door.

9:42Bryan Yeah. So what I did is I measured from that corner to that corner.

9:46Brett Oh, good.

9:46Bryan And I got between 40 and 41, but I'm like, "How come that's not—"

9:50Brett Yeah, that's— Why don't we do this? Okay, why don't we do this? Let's do 40 and call it a day. And then Derek's super good at tuning. Feel free to write it in if you want.

10:02Bryan No. Well, he won't get it right. Okay, if we have to redo it—

10:06Brett Yeah

10:08Bryan … he can put up the door and then we can just... See, I think it's going to go up to that.

10:14Brett Mm-hmm.

10:14Bryan It's going to go up to this—

10:16Brett Yeah

10:16Bryan … and then the clips are going to go on that.

10:18Brett Okay. I'm with you 100%, dude. I'm totally with you. I think that's how they're going to do it.

10:22Bryan And then what I did was this, is I traced that and I didn't even take that into consideration. S*n o* a b***h. See, I traced... I'll tell you what I did.

10:32Brett Oh.

10:32Bryan I traced inside.

10:33Brett Oh.

10:33Bryan I traced that. I had the guy hold it on this side of the... And I just went a couple of times. You can see I moved over a couple of times.

10:41Brett Mm-hmm.

10:41Bryan So...

10:43Brett No, this is not.

10:46Bryan I know.

10:48Brett Yeah. This is not.

10:49Bryan But I want to be able to sell this s**t because, I mean, honestly—

10:52Brett We don't... I don't know how many Derek actually does—

10:54Bryan Yeah

10:55Brett … get those, like with the half circle at the top.

10:57Bryan Right. Okay, because this guy was pumped with this solution.

11:00Brett Yeah.

11:01Bryan And I mean, it was super... There's good margin here. Let's just put it that way.

11:05Brett So then we're going to cut a bottom piece first—

11:07Bryan All right

11:08Brett … at 40.

11:09Bryan Okay.

11:10Brett Okay. We'll cut—

11:10Bryan Let's do it. Yeah. Bottom piece at 40.

11:12Brett And the way I do it here, that's just how I just learned by myself.

11:18Bryan Uh-huh.

11:19Brett Nobody told me how to do this.

11:20Bryan Yeah.

11:21Brett I slightly remember if my dad kind of... It was so long ago. I think he just didn't care. Like I just had to learn.

11:31Bryan Yeah. Okay. All right.

11:32Brett And before this vending machine—

11:35Bryan Oh, really?

11:36Brett … I was f****d. Some of them I couldn't do. You could not... Like this one, I don't think I would be able to do because of just the way it's, how long it is and sort of anything like that.

11:47Bryan Yeah. All right.

11:49Brett 40.

11:49Bryan Well, let's see how you do it. I mean, what angle do you make that?

11:52Brett See, I don't know yet.

11:54Bryan Wow.

11:54Brett So I'm going to cut the bottom first, and then we're going to figure that out—

11:57Bryan Okay

11:57Brett … after we cut the bottom piece.

12:05Bryan Well, no, I'm just saying maybe you won't.

12:10Brett Yeah.

12:14Bryan I thought I saw a one-inch bronze over here, dude. Is that a one-inch bronze right there?

12:18Brett Yeah, I think this stuff's kind of scratched. Well, that's what it's all right here. I've seen right here.

12:27Bryan Yeah.

12:30Brett I think.

12:31Bryan Okay. That's cool. Hopefully you're not burning through your fuse there.

12:35Brett Yeah.

12:40Bryan So right now we're going to cut it for 25 and just kind of see how it goes?

12:44Brett Yeah. Well, yeah, the 45s, they always cut that angle, whatever angle where it comes up to. But that's what I do. I don't know what kind of angle to cut it. All right. And then we're going to go with this one. We're going to go... I just kind of-- So I wish I could find a better way of doing this. Like I wish... My plan, I think, next time I replace my carpet on here—

13:26Bryan Yeah

13:27Brett … I'm going to try to put maybe little holes. Because I got to put this down. I got to make it so it stays, and then I got to put a hole up here for wherever—

13:40Bryan Oh, shoot.

13:41Brett You'll see when we do it.

13:41Bryan Okay.

13:42Brett So I'm just going to clamp this down over.

13:51Bryan Okay.

13:57Brett Sweet, dude. 40, so the middle is at 20. So then we're just going to see where the middle is, and then go up to 10.

14:08Bryan That's crazy. Yeah. To be able to do that.

14:14Brett Actually—

14:14Bryan I got to see how this sanding machine works, dude. I'm pumped.

14:17Brett So there.

14:17Bryan I've never seen this thing in action.

14:19Brett 20 is right there.

14:21Bryan Yeah. It's right there.

14:24Brett And so we're going to make a mark. So I just kind of... And I know I mark up my table—

14:29Bryan My table, yeah

14:30Brett … but it's the only... I guess you don't need to mark it, but this is my stop. Here. Okay, so that's how I know.

14:40Bryan That's so super smooth. So now what are you going to do, man?

14:46Brett Good. Anyway.

14:47Bryan Yeah.

14:48Brett So now we need to go find the right circle.

14:52Bryan Right.

14:53Brett That's all in the back.

14:55Bryan Yeah.

14:55Brett Okay. We just need to find the right... And I'm hoping I have... This is something we can try to keep this off, but .

16:29Bryan Okay, so then you take that bend. Now we go over here, right?

16:31Brett Well, let us see if this-- Let me see where we're at. Yeah. Actually, let me take this.

16:37Bryan Oh. Did you make this door? You didn't do that, did you?

16:44Brett No, I'm just re-screening it.

16:48Bryan Got you.

16:53Brett So I'm thinking that one will probably be the best.

16:57Bryan So what would you do? You and I are going to bend it so that it goes like this a little more?

17:02Brett Yeah, we're going to bend it. Yeah.

17:05Bryan How are you going to get them to connect? How do you do that?

17:09Brett Let me see. Let me see.

17:09Bryan Oh, s**t. All right.

17:12Brett There's little plastic corners. They're adjustable—

17:17Bryan Oh, s**t

17:17Brett … corners.

17:19Bryan Dude, by the way, I saw that killer... You made this killer door that goes to a swinger, and I helped your dad put the, I don't know, Loctite tape on it and install it. But dude, it was pretty legit what you made. And you went like this, boom, boom, here's the door handle like that—

17:41Brett Oh

17:41Bryan … and then like that all the way over. Was that you or your dad that made that?

17:47Brett This was, I'm thinking back four weeks ago. It had a little handle.

17:52Bryan Uh-huh. And then it went on the inside of the door because the people were complaining about their security door, bugs were going through it. So you guys made a custom interior screen. I thought that was pretty slick, dude.

18:06Brett Oh, yeah, it was about a month ago. I remember that now.

18:08Bryan Yeah. Was that you?

18:09Brett Yeah.

18:10Bryan That's pretty intense, dude That stuff, I just hope that when I do it, I hope it works.

18:15Brett It worked. Hold on.

18:17Bryan That was pretty cool, man.

18:19Brett All right. All right. So then—

18:20Bryan So where are you going to cut it?

18:21Brett Well, I'm going to make it a little shorter right now. I'm just going to cut because I want all this piece—

18:28Bryan Yeah

18:28Brett … here. So I'm just going to go cut it right here.

18:30Bryan Okay. Now, what angle are you going to cut it at?

18:36Brett I don't know. I'm just cutting it.

18:38Bryan Oh, s**t.

18:38Brett It doesn't matter yet. I just wanted that extra... And then I have to... So I'm only putting this in because we're going to bend it, and when you bend it it kind of squishes this. It squishes the frame in.

19:06Bryan Yeah.

19:07Brett So I put this stuff in, and it kind of helps it.

19:14Bryan Mm-hmm. Man, this guy wants a SunTex unit. Does the door have SunTex in it?

19:22Brett What's that?

19:23Bryan Does the door have SunTex?

19:24Brett The retractable? No.

19:26Bryan Man, really? Ugh. That's not going to do anything. I mean, if—

19:29Brett That's a good point

19:29Bryan … if you're a sailing in, then who cares? But yeah, it doesn't. And so you do this right here because you want to keep that track right there somewhat filled.

19:48Brett Well, it's going to squish it. Yeah. Because when I bend this—

19:53Bryan Yeah

19:53Brett … it's going to squish this.

19:55Bryan Yes. Uh-huh.

19:55Brett And this just helps it—

19:57Bryan With—

19:57Brett … not squish all the way. It will still squish, but...

20:02Bryan How many of these bended frames do you do with the amount of volume you do in this place?

20:07Brett I don't do too many.

20:08Bryan Once a month?

20:08Brett I only do maybe one of these, yeah, once a month maybe, like it.

20:12Bryan Yeah. But I'm excited to see how you do this right here.

20:14Brett All right. So this bending machine—

20:18Bryan So you're going to eyeball this, huh? Is that what you're doing right now?

20:21Brett Well, I'm just... Well, so bending machine. You got to bend it. I think we're good. But you just got to keep bending. But it really, sometimes...

20:45Bryan Is it good then?

20:46Brett Oh, maybe. I don't know if it bends so much. So this is going to push this down. This is the part where you can mark your... You can see a mark.

21:30Bryan Oh.

21:31Brett You can see a mark right there.

21:33Bryan Dude, that's good. Yeah, not cool. All right.

21:39Brett Let's see if this...

21:41Bryan So can you feel it bending when you do that?

21:44Brett No, not really. See, I don't think it really did anything.

21:51Bryan Okay. So now you have to crank the s**t out of that handle now, right?

21:53Brett Yeah, we'll just bend it a little more here.

21:55Bryan Actually, I think you did. I can see it a little.

21:56Brett It bends it a little bit? Yeah.

21:58Bryan Yeah. All right. So what are you going to do, a full rotation then on that thing?

22:01Brett Yeah, maybe half. Maybe a...

22:05Bryan Yeah. The funny thing about this job is—

22:15Brett Yeah, let me try this now ...

22:18Bryan sometimes you go, "Seriously, dude, I'm putting in the work, man, and I'm doing everything you ask of me." And I do not run through them one time and get bent.

22:28Brett See, that's what I'm saying. You got to just keep coming back and seeing where it is, and...

22:35Bryan Ooh. You're getting there.

22:37Brett See? Yeah, that one, probably maybe one more turn.

22:41Bryan One more full turn.

22:44Brett Yeah.

22:45Bryan So you drill into your table, huh? And you mark it up and stuff?

22:50Brett No.

22:50Bryan Okay.

22:51Brett It's better. Yeah, I think you could get away with probably one and a half, two, three eighths, or five eighths. But I don't do...

23:30Bryan Yeah.

23:31Brett Yeah, I don't know why they even give you that option because—

23:33Bryan Because you always use one-inch, right?

23:36Brett Well, because the circle frame's only come in one inch.

23:41Bryan Ooh. That's pretty damn close.

23:46Brett Yeah, just a tiny bit more. Maybe one—

23:48Bryan Yeah, like a half turn

23:48Brett … Yeah, maybe even a quarter turn. Just barely.

23:55Bryan Well, if you did more of this, you definitely have to get it closer to your table.

24:25Brett I wish it was somewhere else. All right. I'm calling this. This is it. This is the one right here. It's a tight... We could probably just push it, but if it's—

24:34Bryan Dude.

24:35Brett Perfect. All right.

24:35Bryan Dude.

24:36Brett So—

24:36Bryan That's it. So now what do you do? You mark it?

24:39Brett I feel like we're going to have to maybe... I don't know. I feel like that's not... Yeah, see, that's not going to work. So now I'm going to have to recut this one to maybe... Maybe do another... I don't even know what. Do like a 25 with that 2... This is the part that is just kind of a pain in the butt, trying to find what cut cuts to make.

26:25Bryan Yeah.

26:25Brett I feel like—

26:28Bryan Yeah. Let me see what you're up against.

26:30Brett I feel like we... Unless it has to be more than 45.

26:45Bryan Right. Yeah. So you've got to go the other way is what you're saying. What time do you usually get out of here?

26:52Brett Let's see, it's 10:30? I kick you out of here at about 11:30.

26:57Bryan Oh.

26:58Brett Yeah.

26:58Bryan I'm so sorry.

26:59Brett Okay, yeah. We've got time. Don't worry.

27:02Bryan No, no, no.

27:06Brett Maybe like at 50? I'm just going to cut this one. And then I'll— If that's work, then I'll—

27:32Bryan Yeah. Mark.

27:33Brett Yeah, this is a weird one. Dude, I don't know what to do with this.

27:52Bryan See, maybe that's why that one that he showed you is like all...

28:02Brett Maybe I should cut this.

28:06Bryan What do you mean?

28:08Brett I don't know. We're just guessing here.

28:09Bryan Yeah.

28:09Brett Maybe I should cut... Okay. Well, I'm going to take out this.

28:33Bryan Guess work, man.

28:36Brett That's why— Glad I have the margin on this thing … when they work and they're perfectly sized, I don't have to doing this, it's so much easier.

28:46Bryan Yeah.

28:48Brett These custom ones are... So maybe if I cut this one at an angle, then... Or some kind of angle I can— Yeah. All right. I still don't know what kind of angle, though. Oh, boy. So it's a different angle.

29:23Bryan Maybe your corner piece—

29:31Brett See, I don't know what I'm going to do here.

29:36Bryan One of your corner pieces looks like... Gives a full-blown visual here. Maybe cut accordingly to those.

29:59Brett No, these go in—

30:01Bryan Oh, and they move freely.

30:02Brett Yeah. Of course. So these have nothing to do with that.

30:04Bryan Oh, I see.

30:05Brett Because they can do whatever. They don't have—

30:06Bryan Real quick, let me ask you this. If they have nothing to do with that, can they just go like that? Wouldn't that be your driver, though, right? Because then...

30:20Brett So this has to be like this. I have to get it there.

30:24Bryan Mm-hmm. Couldn't we just do that and call it a day?

30:30Brett Hold on. Because it's got to go like that, right? So then that's got to go like that. So then you put one in over there, right? It might still open something right here.

30:40Bryan In other words, could you—

30:41Brett I don't know if he's a customer right now.

30:45Bryan Wouldn't that be our solution right there? Wouldn't that be it? Or am I tricking you?

30:50Brett No, I mean, it could.

30:51Bryan Because how different is this thing that Derek generated? That's what I'm saying. That looks like corner right there.

30:57Brett Does it?

31:00Bryan If the customer doesn't notice that it's... Well, remember, what my customer wants is air flow. I just—

31:10Brett But he didn't put a screen in, did he?

31:12Bryan No, there's a screen there.

31:13Brett There's a screen.

31:13Bryan But you just can't see it. But I don't think there's a corner in there.

31:17Brett I don't think you're going to be making a corner here, bud. I don't think... There's no way to connect it, unless I'm tricking you. Look. I mean, there, that's the best you're going to be able to do unless you can cut metal off. You can't cut metal. You could go at a hard angle here and meet it right there.

31:44Bryan So cut it like this?

31:46Brett Mm-hmm. Here, like this. But cut it like that. Cut it like that.

31:54Bryan Why do you want to cut the corner?

31:56Brett No, you see this piece?

31:57Bryan Yeah.

31:58Brett Cut this piece like that.

32:00Bryan Oh, I see what you mean.

32:01Brett Okay. And then cut and leave this piece. Because you'll have that extra room right here, you can cut this piece out. It's the angle.

32:17Bryan So you're saying cut that way, but yeah, it would be like this, right?

32:19Brett Yes.

32:20Bryan I mean... I think that's it, right?

32:33Brett Yeah, what would you say? Let's see. Right. See what this does. Significantly closer. You know what? That just might have to be what we do. Because the only other thing you could do is now this piece go at a hard angle, so that it stuffs into this corner. But I don't think you're ever, no one, not just you, no one's going to be able to connect that in there.

33:26Bryan Yeah, I don't see—

33:27Brett The only thing you could do better here would be maybe cutting that at an extreme angle, but boy, you're going to have to be clean. And then remember these angles, because then you've got to do the same thing to the other side. And this isn't even the right size.

33:42Bryan Yeah.

33:42Brett Okay. So— These corners help bringing these things out … Well, first. Put the angle first. Hey, you can't really go—

34:00Bryan Yeah.

34:00Brett I mean—

34:01Bryan Yeah, that's all you can do. I think that's your best move, right? That's the best you can do right there, right?

34:10Brett Because you can't turn that blade anymore like me and my—

34:13Bryan Well, I kind of... Yeah, I know. I mean... All right. That's it, dude. That's the best you can do right there.

34:28Brett And I think that's what we're going to have to— That's the best you can do … And then I rivet it on the other side just— It is lifted right there. Is there a way to...

34:40Bryan I don't know.

34:46Brett These are still... What do you call these things?

34:47Bryan I don't know. Adjustable borders?

34:50Brett Yeah, I think they're in...

34:51Bryan Yes. They used to have one-inch ones and now they don't. It's because this is how you made the door.

34:57Brett Some kind of board.

34:57Bryan It's how you made the door too, right?

35:00Brett Possibly, or I took a metal one and I cut them weird ways.

35:07Bryan Yeah. Because that door was slightly...

35:08Brett These things. Very low angle. Very low—

35:11Bryan And they used to come in one inch, and they were awesome. But then they stopped making them, so I don't— Okay. So three-fourths. So you're using a three-fourth right here.

35:22Brett Yeah. Still works.

35:26Bryan Okay. So, okay. So— Can you make that work? … let's do another piece.

35:29Brett Okay.

35:31Bryan 40 inches, right?

35:32Brett Yeah, let's do 40 inches.

35:33Bryan Okay, but do you remember that angle? Because I don't.

35:35Brett Yeah, I'll just wing it.

35:38Bryan Ah!

35:38Brett Well, not wing it, but I'll...

35:51Bryan More.

35:53Brett That's more.

36:39Bryan Yeah. I mean, yeah. We kind of just put this in. Does something need to be adjusted or we need to make it different?

36:52Brett Yeah. That makes life... Kind of like what we did, dude.

37:09Bryan Yeah. Let's see how this works.

37:11Brett Now we got to cut on this guy. So that's going to work.

37:30Bryan Is that still in the middle now? I don't know if that's...

37:40Brett Close enough.

37:41Bryan Yeah, I think it's close enough.

37:44Brett Close enough.

37:44Bryan All right. Now, let's see how we did that. Okay, that's legit, man. So you're going to cut that side right there?

38:05Brett Because then, see, I don't even know where to cut it.

38:07Bryan Well, you cut it, I mean, that's pretty much a— So it's like— It's a zero … right there. Right?

38:16Brett You want to cut it flush. Oh, I got you. Look. That piece touches the bottom piece. Now make your line from there. See what I'm saying? Like that. See how that piece right there touches right here? See how it's touching that inner, right there?

38:35Bryan Yeah.

38:36Brett See if you can use that as a marker.

38:41Bryan Cool.

38:52Brett Oh, I can't. I was like, "Oh, I want to see what angle that is," but I cannot. Actually I can do it.

39:06Bryan How many hours you got to put into that?

39:10Brett I'll be here till...

39:12Bryan Awesome.

39:12Brett Just give me a minute to like... Oh, you know. I'll just have to guess. I don't know. So that's right there up into that corner.

39:49Bryan Oh, like that.

39:50Brett Yes, sir. Yep.

39:51Bryan Okay, boom. Go for it.

39:56Brett Hold on.

39:58Bryan There you go. Yeah, push it in. All the way down, there, to that riff there.

40:06Brett Oh, all the way down.

40:07Bryan Yes, sir. There you go.

40:08Brett All right. That'll be fine. Hold on. There. Yours down?

40:13Bryan Yeah. How come it's not centered anymore?

40:15Brett Because I cut it too short.

40:18Bryan I think— Does that really matter?

40:20Brett No. I think we just going to do this and see where we're at.

40:24Bryan Let's do it.

40:25Brett And then if I have to make adjustments, I can send it back with Derek.

40:29Bryan Derek can do it, too.

40:32Brett Maybe I should just screw it and not worry about rivets.

40:37Bryan When you say rivet, what do you mean?

40:39Brett Like I want to rivet this in here.

40:42Bryan So this would—

40:43Brett No, screw it—

40:44Bryan Okay

40:44Brett … because if he has to Jimmy rivet—

40:45Bryan Yeah

40:46Brett … then he can't. You leave that door open for us to Jimmy rivet.

40:52Bryan This is bugging me, man. This is from the sun hitting this.

40:58Brett Yeah.

40:59Bryan Is that what that is? That's— I thought that was just plastic coating, covering

41:04Brett Oh, that is only tape.

41:07Bryan Yeah. It looks like tape.

41:08Brett That's a plastic coating.

41:10Bryan Yeah.

41:10Brett That's a plastic they coat around it, but it got into the sun, and the sun just baked it in there.

41:15Bryan Yeah, for sure. But... All right. Cool. All right. Well, I think that's it, dude. Let's just give it a try and let it ride. And if we have to make little tweaks, I'll send it back with Derek, if you don't mind making—

41:34Brett No, I don't mind.

41:35Bryan All right. I mean, it looks okay. Looks legit. Yeah. See, that's what... And if he says something like, "Hey, we've just never come across these..."

41:48Brett He won't.

41:50Bryan This guy right here let me pull all the triggers, dude. He let me pick out the color for him. Dude, he wanted a swinger. I didn't feel like doing a swinger because I don't really know swingers that well, so I sold him a chopper.

41:58Brett Right there?

41:59Bryan Yeah. I don't think we could've done it.

42:01Brett Well, yeah. I don't think we could've either.

42:04Bryan However, when I brought this to Derek, Derek's like, "Dude, sell him a retractable."

42:08Brett Yeah.

42:08Bryan Do a retractable, and he's all in. I can do the rest. I was like, all right, cool. Because a swinger, we probably would've had to—

42:14Brett Build

42:14Bryan … put build something on the top.

42:16Brett Yeah.

42:16Bryan And I know he is, too. He has to build something on the top there, but—

42:19Brett Yeah.

42:20Bryan All right. Well, let's— All right. Screw it. I'll give you a ring … screen this. Let me see what he's doing right here.

42:25Brett All right. Yeah.

42:27Bryan Clean this up. And then, hey, Brett, I'm going to leave this here for you, okay?

42:32Brett Okay.

42:32Bryan So, and then, once we get this thing installed Tuesday—

42:36Brett Yeah

42:36Bryan … just throw it away.

42:39Brett No, I'll keep it.

42:43Bryan Sweet, dude So, you guys busy as far as July go-- or I'm sorry, August goes?

42:52Brett I've just been nonstop.

42:55Bryan It's fantastic.

42:55Brett Yeah, it is. No, it is.

42:57Bryan Fantastic.

42:58Brett So I know when I start stressing a little bit, then I know I'm busy.

43:02Bryan Okay.

43:02Brett Like, I know.

43:02Bryan Are you stressing?

43:04Brett Last week was crazy.

43:05Bryan Uh-huh.

43:06Brett Well, and then last week, yeah. Because last week I wasn't here-- I took Friday half day, and I wasn't here Saturday. So then when I get here on Monday, it's just—

43:15Bryan Boom

43:15Brett … like—

43:16Bryan Yeah. Yeah, yeah, yeah.

43:17Brett But I have to have a life, so I gotta.

43:19Bryan I went to the same toy store, or the toy show again yesterday.

43:22Brett I was going to ask you if you'd done that this year.

43:24Bryan Yeah, I know. It's two times a year now.

43:26Brett Sweet.

43:26Bryan So it's in August and January.

43:28Brett Did you go to both?

43:30Bryan I went to the January one.

43:31Brett Cool.

43:32Bryan I think that's the one where I showed you all that stuff, and then we went, yeah, last week.

43:35Brett Did you pick up any good stuff?

43:37Bryan Yeah, I spent about $1,300. But some of those are like GI Joe from India, and there's one from South America that you can't get here, and then a big helicopter. This movie called "Blue Thunder."

43:54Brett I remember "Blue Thunder." Oh, the blue helicopter?

43:56Bryan Well, so "Blue Thunder" was a movie, but it was also a series, like "Airwolf." I don't know which one it is. Whichever one had the blue helicopter—

44:04Brett Mm-hmm

44:04Bryan … in it. I got the helicopter.

44:06Brett That's legit.

44:07Bryan That was 300 bucks.

44:08Brett Wow. That's got to be badass. Are you going to resell it?

44:12Bryan No, that goes in your collection. Dude, if I die, I don't care what happens. They can do whatever they want with it. I don't care. Anyway, all right. All right, Suntex.

44:23Brett Suntex, that's it, 80.

44:24Bryan All right. Suntex 80. By the way, is that the only Suntex you have?

44:29Brett I have 90.

44:30Bryan Yeah, no, go 80. And then, hey, do you have something called Stucco?

44:35Brett Stucco.

44:36Bryan Stucco Suntex? Yeah, not for this job, it's for another job.

44:39Brett Is this Stucco?

44:40Bryan Yes. It's this.

44:41Brett That Stucco right there?

44:41Bryan This is right here. If I had to buy—

44:46Brett I don't know what the... I've never done 97s. I don't know what that is.

44:51Bryan But yeah, that's... Do you use Stucco?

44:55Brett We used to use a lot of it in Borrego.

44:58Bryan Uh-huh.

44:58Brett But then the sun just makes it gross.

45:05Bryan Uh-huh.

45:05Brett It turns it gray.

45:06Bryan Yeah, I've seen it. And—

45:07Brett I've seen it

45:09Bryan … but yeah, that's Stucco. That's Stucco. Okay. I got a guy who wants two five-by-five frames built with Stucco. I gave him a price he's chewing on right now, but if it hits, I don't want to buy a whole roll. Could I buy some off you guys?

45:25Brett You can buy pieces from Active.

45:28Bryan Yeah, but of the Stucco? Because I know I can do the—

45:31Brett You can buy pieces of anything.

45:31Bryan All right, that's fine. That's good, because they're making weekly drops to me at my house. Yeah. So I only have—

45:37Brett Oh, okay

45:38Bryan … the 36.

45:39Brett Okay. You're fine. As long as I can buy pieces of them.

45:41Bryan I've done it already on some stuff, so I know exactly what to do. Okay, cool.

45:45Brett All right, man, cool.

45:48Bryan Little Suntex when we're out of here. If this works, dude, I'm going to send you a text message with a high five in it if this works.

45:55Brett Try you.

45:56Bryan But I'm confident, man. I'm confident between Derek kind of junioring it a little, that I think we get it to work. You can go to the other one, right? You can go to this one?

46:07Brett No, it's a 36.

46:08Bryan Ah.

46:08Brett I don't want to use a 48. I'll cut that. I'll be able to use that—

46:12Bryan Okay

46:12Brett … for like samples.

46:14Bryan Cool.

46:14Brett Like, they're always wanting samples. Okay. 205. What do I got to do over here?

46:23Bryan That was slick with these variable... I've never seen these things. You've been giving me some ideas, dude.

46:29Brett What?

46:30Bryan These—

46:30Brett Oh, those—

46:31Bryan … these variable angle … JUB tails?

46:31Brett Yeah.

46:32Bryan These are sweet.

46:34Brett They help me all the time.

46:36Bryan They've got to be expensive, huh?

46:37Brett What am I doing? No, I don't think they're expensive. I don't think corners are that expensive.

46:41Bryan 205 spline, is that what you're grabbing?

46:44Brett Yeah. But since I'm going to use the 205 on the bottom, but this, the one on the top, I think it's now crushed a little bit.

46:53Bryan Uh-huh.

46:53Brett So I don't think the 205's—

46:55Bryan Yeah, you're right. It is crushed a little bit

46:56Brett … going to work.

46:57Bryan Holy. Yeah, it's fat right here and thin right there.

47:00Brett I know.

47:01Bryan That's—

47:01Brett Sometimes I take my ruler and just kind of—

47:05Bryan Uh-huh ...

47:06Brett straight.

47:08Bryan So yesterday I installed 11 screens for the dude. Listen to this. In January, his freaking kitchen caught on fire. And so dude, he was able to salvage all the screens in all the other rooms and wanted everything... They had just got done finishing them all. And I was like, "You should really create new ones." He's like, "That's what he's all done. I don't want to pay for it." I'm like, "All right, cool." So I did exactly what you just did, which was, his channels were all like melted and closed together, so I ran like that right there through the channels and opened them up a little bit. But I was able to do it, and then some pieces were so melted and messed up that I just—

47:44Brett No way, yours did?

47:44Bryan Yeah. Yeah, he should— Dude, I'm telling you, I come across... You got to remember where this guy's located.

47:49Brett Yeah.

47:49Bryan Oaktown, dude. It was Oaktown.

47:50Brett Oh, okay.

47:51Bryan Yeah. So, he told me straight, he says, "I got 500 bucks to throw at this." And I'm like, "All right, 500 bucks, here's what I'm going to do."

47:57Brett Of course.

47:57Bryan So I worked out $500 worth. When we used to, I used to do screens for, called Glenview Glass and Screen.

48:05Brett I do know who... Glenview's right next to my house in Altona.

48:09Bryan Dude, but the customers, they would give... These customers are bringing just s**t stuff.

48:17Brett Mm-hmm.

48:17Bryan And I'd be like, "This stuff needs to be new." "Nope, just screen it." Do what they want. I'm like, "The rollers are all broken." "Who cares?" I'm like, "Okay, whatever."

48:27Brett Yeah.

48:27Bryan I'm screening it. So I don't have to deal with them anymore.

48:28Brett Well, you know what? You know why you were getting orders like that? You were getting orders like that because Glenview doesn't, they don't teach the customer like Joff does, and like Joff's teaching me to do, and like you guys do.

48:41Bryan Yeah, no, these customers are just coming in—

48:43Brett Yep

48:43Bryan … to Glenview and be like, "Hey, I want this, I want this." And I think they were thinking we were charging them too much to do it, but it's like—

48:53Brett I was doing your stuff, man.

48:53Bryan Yeah Cost of business.

48:55Brett Wait, so I do the bottom first—

48:57Bryan Yeah

48:58Brett … and then I do the—

48:59Bryan Yeah

49:00Brett … the circular part.

49:01Bryan Yeah. Usually I would just say, "Let me do this," but I want to see how you do this with a bend in it or—

49:05Brett And then we'll use maybe a 190 or go in there.

49:10Bryan You have a 190?

49:10Brett I have a 185. No, I just want something littler. I have to have everything.

49:21Bryan Dude, all I've been doing, man, is back-filling your initial order that you had me get it in January or November, whenever it was. I've just been back-filling. Seriously, it's pretty legit. You guys pretty much nailed it with what I needed. I've had to go out when there were a few things, like die-cast clips I had to buy and s**t like that—

49:37Brett Oh, yeah

49:38Bryan … and then screw, but Josh can give me all of that. I buy a couple doggy doors. By the way, dude, I did my second doggy door last week.

49:45Brett Do the first one.

49:45Bryan Oh my gosh, dude. I effed that one up so bad, dude. I was so embarrassed, and so I re-screwed it, and I did it again, and it came out nice. But dude, the one I did Tuesday night, the guy was pumped, man. I showed up with these. He's like, "This is really nice." And his dog was—

50:00Brett Looks good

50:01Bryan … in and out of it, dude. What I did is I went back and looked at our video because it was like five months in between doing my first one by myself. Actually, my first one, you and I did, then I did one by myself, effed it all up. And then this one, I had to go back and look at the video again, but the videos are killing, man. They're working. I'm getting customers that don't like these paw print doors. They think they're cheap. So then it's like—

50:23Brett Well, what about the one I gave you?

50:24Bryan What do you mean? I went to your dad and said, "Give me the part number for the paw print one," and he gave me some screwy part number, and I ordered like four of them. And honestly, the ones I'm using, people like...

50:39Brett I thought you gave me your—

50:40Bryan Yeah, I had to give you one because you put one in mine.

50:43Brett Maybe you gave me this.

50:46Bryan Nope. That's not it. That's not it.

50:49Brett Does it look like this?

50:51Bryan Yep, that's it.

50:52Brett Okay.

50:53Bryan That's it. That's the one I've been using. These things—

50:55Brett What's wrong with those?

50:56Bryan They're okay, but these freaking things, you have to cut these off on the inside—

51:06Brett Oh, because they touch that?

51:07Bryan … before they hit that center piece. Yeah, this will hit.

51:13Brett Oh, I see. These things will hit this. Oh. So what do you do, route them off?

51:18Bryan Yeah, I just route them off. This one was a... This was—

51:22Brett Yep

51:22Bryan … Aaron's job.

51:23Brett Uh-huh.

51:24Bryan Put it in. It kept bouncing out. Then we had to buy an active one. This was the one that I gave you right here.

51:30Brett Yeah. Yeah.

51:32Bryan These are okay. I don't mind them, but... So the paw print ones, I've got to get my hands on that part number.

51:40Brett Yeah, I don't even know what that one is, what the part number is.

51:43Bryan Yeah. And you guys get them on Amazon, I believe too, right?

51:46Brett Yeah, we get all of them. Maybe there's a part number on it. I can't hear. Let me see.

51:51Bryan Maybe you can find it. I don't know. But they're easy. I don't mind the paw prints, just some of these customers think they look cheap or... And then Aaron had another customer that we ordered from Hale Dog Doors.

52:08Brett Uh-huh.

52:08Bryan It was like a $350 dog door.

52:10Brett Yeah, dude.

52:10Bryan But dude, this thing, yeah, these things are legit. Active—

52:19Brett Sells dog doors?

52:20Bryan No, I know. Yeah.

52:20Brett Okay.

52:20Bryan Their dog doors are okay, but I like putting those in, but customers do not like this black flap—

52:33Brett Mm

52:33Bryan … because their dogs can't see through it.

52:35Brett Mm.

52:36Bryan They got some—

52:37Brett How much would that thing cost?

52:37Bryan They got some dumb dogs. Or a cat door, I guess. My dog couldn't put his paw through that, dude. S**t. But you know the ones where you've got your door right here, and then they go from top to bottom, and then down at the bottom, it's like a metal piece? Then down at the bottom, there's a dog door. Have you seen those? Because they sell those now, too. So here's your door, right? And it's a metal piece. You got your screen right here. There's a metal piece. It goes all the way down, runs from top to bottom, and then the bottom piece of the metal is a dog door. Have you seen that?

53:10Brett I think that's what we're... I think we're talking about Active?

53:13Bryan We're talking about Active, yes.

53:14Brett Yeah, I think it's these. So this goes—

53:22Bryan Oh

53:22Brett … this goes inside the door.

53:24Bryan Yes.

53:25Brett And then this goes on top of that.

53:27Bryan Okay, so that's how that is.

53:28Brett That's probably what you saw.

53:29Bryan Okay. All right. Those are for heavy duty dogs that just blow through it, right?

53:32Brett Yeah, it's just the Active door. That's what they sell.

53:35Bryan Yeah. They don't make it that bad.

53:39Brett I think this is—

53:41Bryan This is it.

53:42Brett I think, yeah. I think with what I've given you and where we're at, this is the best we could do. So let's just see where it goes. Yeah, I'll just cut it, and then we'll—

53:51Bryan Yeah. All right. Now look, Brett, if something goes haywire and Derek spots something or sees something, can I send this back with him and you can make the adjustments?

53:59Brett Yeah.

53:59Bryan And then get back to—

54:00Brett That's what we need to do.

54:00Bryan All right, cool, man. Sweet. And then what do I owe you guys for this right here, with this?

54:05Brett Well, let's just see if it works first.

54:07Bryan All right.

54:08Brett But yeah, let's finish it first—

54:10Bryan Okay

54:11Brett … and me and my dad can—

54:11Bryan All right. There you go. Because, yeah. I keep on running track with your dad and I pay him at the end of every month because, well, I've got to pay him for Derek installs. So that's, there's Derek going to my jobs, and that costs me money, so—

54:27Brett Mm-hmm

54:27Bryan … I true up with him on that, and then you're rock solid about giving me random pieces of s**t all the time. I've got to get out in the field, so—

54:37Brett Yeah

54:37Bryan … I have a tally of all that, which is killer. And then—

54:40Brett It's funny, sometimes I'll forget that I even... You'll be like, "Hey, Brett, I need..." or a question, and I'll completely forget about you.

54:48Bryan Yeah.

54:48Brett I'll be like, "Oh, yeah, Brian."

54:49Bryan Yeah. You're like, "Who's Brian? Why is he asking me stuff?" Well, I mean, for me, I got busy.

54:54Brett Yeah.

54:54Bryan I got busy—

54:56Brett With the screens?

54:57Bryan Like screens.

54:58Brett Yeah.

54:58Bryan I mean, dude, I've done probably, I think my 17th or 18th retractable When I say done—

55:06Brett Yes

55:07Bryan … I sell them, he installs them. So let's get that straight. I'm not installing, dude. Not when I got Derek, dude. Just let the—

55:15Brett Those things, don't. Yeah, you don't want to.

55:17Bryan Yeah. I don't want to do that. And then I'm starting to sell swingers, so I sold my third swinger, and then I'm just picking up. Like yesterday, man, I was doing an install. I got three phone calls on Google, man, and just doing little things.

55:29Brett Yeah.

55:30Bryan And it's nothing big, but dealing with the old people and their little weird idiosyncrasies and making money where I can. But I've done, again, this is good for me, like you, you would be slow as molasses, but I've done about 18 jobs so far this month. It's just little jobs. Nothing to fire at.

55:54Brett Yeah. That's okay.

55:55Bryan And then on my spare time, what I'm doing five days a week is dropping my door hanger. I've dropped 27,500 door hangers as of Friday, starting January 7th.

56:06Brett Damn.

56:07Bryan Well, and then Carlton's busting his butt for me on the Google, so doing what we can do there.

56:14Brett Yeah.

56:15Bryan Dude, this is legit, man. With what we got, this is legit, man. We're— Well, I think you kind of saved me on these corners, and I don't know why we're doing them.

56:24Brett You know what? I don't think that's—

56:26Bryan But that's good. If I ever have to do that again, that's fine

56:29Brett … I think this is the best you can do.

56:30Bryan And then you've got to leave it up to the person who's selling it, which is me, to say, "Look, Mr. Client, this is the best we can do. Okay, you got to live with that, but look at how nice this looks. By the way, hey, let's take a look at your retract." I got this, man. This is easy. 11 o'clock, I'm out of here.

56:44Brett All right, cool.

56:45Bryan Cool. Hey, seriously, man, I appreciate this, man. This is huge.

56:49Brett Yeah, man.

56:49Bryan That comes off, right?

56:50Brett Well, I think so.

56:51Bryan That's going to be the piece that is facing. This will be to the wall, right?

56:54Brett Yeah.

56:54Bryan Or is it going to be the other way?

56:55Brett No, you want— You always want that. You want that. Yeah, just like you would a regular screen.

57:00Bryan Yeah.

57:01Brett Because if this was a screen, the tabs would be right here.

57:03Bryan And some people do ask me that, like, "Why do you put the screens on like..."

57:08Brett Sometimes they are, if you're on upstairs—

57:11Bryan Yeah

57:11Brett … then obviously you can't be on the outside. But if you're on downstairs, some people like the tabs on the outside. Well, they want the diamond. They want the window guy—

57:19Bryan Mm-hmm

57:19Brett … to be able to do that.

57:20Bryan Mm-hmm. Dude, seriously appreciate you, man.

57:22Brett Yeah.

57:22Bryan This is huge. Tell Jeff I was here and all that good stuff, and dude, try to get out here at 11:30, man.

57:27Brett Yeah, right.

57:27Bryan Enjoy your Saturday, man.

57:30Brett Yeah, right.

57:30Bryan Go to the beach. We're good.

57:30Brett All right, Brian. See you, bud.

57:33Bryan See you, man.